- How To Reinforce FiberFusion Motor Mount (older planes)
aerofundan
aerofundan6:17 pmFebruary 19th, 2021How To Reinforce FiberFusion Motor Mount (older planes)
This tutorial applies to the older discontinued planes only. The stock motor mount is plenty strong. However,…
07/28/20168 - How To Replace A Damaged Motor Mount
aerofundan
aerofundan3:17 pmSeptember 24th, 2020How To Replace A Damaged Motor Mount
This type of damage is not as bad as it seems and its quite repairable. These things happens...
- How To Rig Up Servo Solder On Servo Extension Cables
aerofundan
aerofundan3:08 pmSeptember 24th, 2020How To Rig Up Servo Solder On Servo Extension Cables
Overview Here’s a simple way to rig up the solder-on lightweight servo extension cables for a neat...
- How balancing cables are connected to Lipo Packs
aerofundan
aerofundan2:53 pmSeptember 24th, 2020How balancing cables are connected to Lipo Packs
How balancing cables are connected to Lipo Packs Due to the non-standardization of current lipo manufacturers,...
- Tips for Handling and Caring of Lithium Polymer Packs
aerofundan
aerofundan2:46 pmSeptember 24th, 2020Tips for Handling and Caring of Lithium Polymer Packs
High Performance 3D/Freestyle flying requires four critical considerations for battery packs which are; consistent power throughout the...
- How To Assemble PA Z-Bend Pushrods
aerofundan
aerofundan2:38 pmSeptember 24th, 2020How To Assemble PA Z-Bend Pushrods
Prior to strating on the assembly you need the following:- A pair of scissors disposable lighter Good...