Design and Production of High Quality R/C planes, since 2004

Blog – Masonry with no sidebars

  • AMR60-slide1

    How To Reinforce FiberFusion Motor Mount (older planes)

    This tutorial applies to the older discontinued planes only. The stock motor mount is plenty strong. However, in instances where prop…

    8
  • AMR60-slide1

    How To Replace A Damaged Motor Mount

    This type of damage is not as bad as it seems and its quite repairable. These things happens for a number of...

    8
  • AMR60-slide1

    How To Rig Up Servo Solder On Servo Extension Cables

    Overview Here’s a simple way to rig up the solder-on lightweight servo extension cables for a neat installation and to get...

    11
  • AMR60-slide1

    How balancing cables are connected to Lipo Packs

    How balancing cables are connected to Lipo Packs   Due to the non-standardization of current lipo manufacturers, there is no universal...

    10
  • AMR60-slide1

    Tips for Handling and Caring of Lithium Polymer Packs

    High Performance 3D/Freestyle flying requires four critical considerations for battery packs which are; consistent power throughout the entire duration of the...

    8
  • AMR60-slide1

    How To Assemble PA Z-Bend Pushrods

    Prior to strating on the assembly you need the following:- A pair of scissors disposable lighter Good quality thin CA e.g....

    9
  • AMR60-slide1
    8
  • AMR60-slide1
    8

0 Comments

Leave a reply

error: