- How to Modify the Thrust 10 to Thrust 40 Motor for Back Mounting
aerofundan
aerofundan6:33 pmFebruary 19th, 2021How to Modify the Thrust 10 to Thrust 40 Motor for Back Mounting
These motors can be modified for back mount operations if needed. This article explains how to.
07/28/20169 - How to Remove and Re-install the Thrust Motor Shaft
aerofundan
aerofundan6:31 pmFebruary 19th, 2021How to Remove and Re-install the Thrust Motor Shaft
Step by step instructions on how to remove and replace a motor shaft.
- How to Fix Landing Gear Mount after a Hard Landing
aerofundan
aerofundan6:18 pmFebruary 19th, 2021How to Fix Landing Gear Mount after a Hard Landing
Repair guide on how to fix your Landing Gear Mount after a hard landing!
- How To Reinforce FiberFusion Motor Mount (older planes)
aerofundan
aerofundan6:17 pmFebruary 19th, 2021How To Reinforce FiberFusion Motor Mount (older planes)
This tutorial applies to the older discontinued planes only. The stock motor mount is plenty strong. However, in instances where prop strikes are becoming frequent or when flying on an over powered setup, a little reinforcement to the motor mount is an advantage.
- How To Replace A Damaged Motor Mount
aerofundan
aerofundan3:17 pmSeptember 24th, 2020How To Replace A Damaged Motor Mount
This type of damage is not as bad as it seems and its quite repairable. These things happens for a number of reasons such as: 1.The use of excessive force when inserting the motor mount into the fuselage during the build. 2. Accidental knocks during transportation 3. Extremely high-G maneouver over-stressing the airframe (due very violent maneouver at excessive speeds). I